USING YOUR REFRIGERATOR
Refrigerators work by transferring heat from the food
inside to the outside air. This operation makes the back
and sides of the refrigerator feel warm or even hot
particularly at start-up and on warm days – this is normal.
Avoid placing food against the air vents in the refrigerator
as it affects efficient circulation. If the door is opened
frequently, a light frosting will occasionally occur on the
freezer’s interior. This is normal and will clear after a few
days. If the freezer door is accidentally kept open, a heavy
frost will coat the inside walls and should be removed.
Your new refrigerator uses a high-speed compressor,
along with other energy-efficient components, which may
make unusual sounds and be more noticeable at night
and quieter times. These sounds simply indicate your
refrigerator is working how it should. They include:
•
Compressor running noises;
•
Air movement noise from the small fan motor;
•
A gurgling sound, similar to water boiling;
•
A popping noise, heard during automatic
defrosting; and
•
A clicking noise, prior to compressor start-up.
Further details can be found in the Troubleshooting Guide.
IMPORTANT
For top mount refrigerators (where the freezer is
on top of the fresh food compartment).
•
Don’t place food forward of the ribs on the freezer
floor, as it will keep the door open.
Ribs
For bottom mount refrigerators (where freezer is below
the fresh food compartment):
•
Ensure all freezer drawers and shelves are pushed
back completely to prevent them from keeping the
door open.
WARNING
LED lighting
Your appliance is fitted with long life LED lighting. In the
unlikely event the LED lights should fail, then the LED lights
should be serviced by the service agent, to avoid a safety
hazard. Refer to the warranty page for contact details.
REMOVING FEATURES
Crisper Bin
Removal (standard Crisper Bins):
1.
Empty food from the crisper. On some models it will
be necessary to remove the bottle storage bins.
2.
Remove the crisper bin(s) by pulling forward, then up
and forward again.
3. For top mount and single door, remove the crisper
shelf by lifting the catches on the left and right
underside of the shelf and pulling the shelf forward.
SpillSafe™ glass shelves
To remove the shelves,
gently pull them forward
until the shelf comes
clear of the shelf guides.
To return the shelf, make
sure there is nothing
behind that may obstruct
movement. Gently push the
shelf, into the cabinet and
back into position.
Freezer shelf
Remove the freezer shelf
by lifting the catches on
the right and left underside
of the shelf to release the
shelf then pull the shelf
toward you.
CATCH
REMOVING FEATURES
17
