9/20/13
PG-2
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service (800) 793-7846
www.westinautomotive.com
P.N.: 75-3035-Rev A
ECO #: W13-0076
CARE INSTRUCTIONS
REGULAR WAXING IS RECOMMENDED. DO NOT USE ANY TYPE OF POLISH OR WAX THAT MAY CONTAIN ABRASIVES
STAINLESS STEEL PRODUCTS CAN BE CLEANED WITH MILD SOAP AND WATER. STAINLESS STEEL POLISH SHOULD BE USED TO POLISH SMALL SCRATCHES.
GLOSS BLACK FINISHES SHOULD BE CLEANED WITH MILD SOAP AND WATER
4. Insert the Nylon Spacers between the Tray Side Mounting Bracket and the License Side Mounting Bracket. Loosely attach the
License Side Mounting Bracket to the Tray Side Mounting Bracket using the supplied M6 hardware.
5. Check the swivel movement of the License Side Mounting Bracket. Tighten the M6 Nylock Nuts as necessary in order to create
some resistance while allowing the bracket to swivel. The resistance will help maintain the License Side Mounting Bracket in the
vertical position during winching.
6. Install the vehicle’s license plate using the supplied M5 hardware.
7. Check the operation of the unit. The hooks on the passenger side of the bracket should lock when pushed in the down position.
To unlock push in on the front of the License Side Bracket while simultaneously pulling on it’s side.
