1,2
2
STEP BAR, PASSENGER (1) AND DRIVER (2)
3
4
MOUNT BRACKET
4,5
2
SUPPORT BRACE, PASSENGER (4) AND DRIVER (5)
6
4
SPACER PLATE
7
2
BOLT PLATE ASSEMBLY
8
2
9
2
M12-1.75 X 110MM HEX HEAD BOLT
10
2
1/2-13 X 2.00” HEX HEAD BOLT
11
2
12
8
1/2” FLAT WASHER
13
8
1/2” LOCK WASHER
14
2
3/8” FLAT WASHER
15
2
3/8” LOCK WASHER
16
2
3/8-16 HEX NUT
17
2
PLASTIC WASHER
M12-1.75 X 120MM HEX HEAD BOLT
1/2-13 X 1.75” HEX HEAD BOLT
QTY
CONTENTS -
CONTENIDO
- CONTENU
TOOLS -
HERRAMIENTA
- OUTILS
3/4” SOCKET
9/16” SOCKET
19MM SOCKET
18MM SOCKET
9/16” WRENCH
RATCHET
TORQUE WRENCH
APPLICATION: 2004-07 DODGE DURANGO
2007 CHRYLSER ASPEN
ITEM
APLICACIÓN: DODGE DURANGO, 2004-07
CHRYSLER ASPEN, MOD. 2007
APPLICATION: DODGE DURANGO 2004-07
CHRYSLER ASPEN 2007
AUTOMOTIVE PRODUCTS, INC.
STEP BAR ASSEMBLIES
25-2630
25-2635
26-2630
26-2635
ENSAMBLES DE ESTRIBOS
MONTAGES DE MARCHE-PIEDS
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
75-0734 REVISION A 8/14/07
1,2
2
ESTRIBOS, ACOMPAÑANTE
Y CONDUCTOR
3
4
SOPORTES
4,5
2
PIEZA DE SUJECIÓN DEL SOPORTE, ACOMPAÑANTE
Y CONDUCTOR
9
2
(1)
(2)
(4)
(5)
6
4
PLACA SEPARADORA
7
2
PLACAS DE PERNOS
8
2
PERNOS CON CABEZA HEXAGONAL M12-1,75 X 120MM
PERNOS CON CABEZA HEXAGONAL M12-1,75 X 110MM
10
2
PERNOS CON CABEZA HEXAGONAL 1/2-13 X 2,00”
11
2
PERNOS CON CABEZA HEXAGONAL 1/2-13 X 1,75”
12
8
ARANDELAS PLANAS DE 1/2”
13
8
ARANDELAS DE PRESIÓN DE 1/2”
14
2
ARANDELAS PLANAS DE 3/8”
15
2
ARANDELAS DE PRESIÓN DE 3/8”
16
2
TUERCAS HEXAGONALES DE 3/8-16
17
2
ARANDELA DE PLÁSTICO
(1)
(2)
(4)
(5)
RONDELLE PLATE 1/2 PO
13
8
RONDELLE A FREIN DE 1/2 PO
14
2
RONDELLE PLATE 3/8 PO
15
2
RONDELLE A FREIN DE 3/8 PO
16
2
ÉCROUS HEXAGONAUX 3/8-16
17
2
RONDELLE DE PLASTIQUE
1,2
2
MARCHE-PIEDS, PASSAGER
ET CONDUCTOR
3
4
SUPPORT
4,5
2
RENFORTS POUR SUPPORTS, PASSAGER
ET CONDUCTOR
6
4
8
2
9
2
PLAQUE D'ECARTEMENT
7
2
PLAQUES DE BOULON
BOULON A TETE HEXAGONALE M12-1,75 X 120MM
BOULON A TETE HEXAGONALE M12-1,75 X 110MM
10
2
BOULON A TETE HEXAGONALE 1/2-13 X 2,00 PO
11
2
PERNOS CON CABEZA HEXAGONAL 1/2-13 X 1,75”
12
8
DADO DE 3/4
DADO DE 9/16
DADO DE 19MM
DADO DE 18MM
LLAVE DE TUERCAS DE 9/16”
MANERAL
LLAVE DE TORQUE
”
”
DOUILLE 3/4 PO
DOUILLE 9/16 PO
DOUILLE 19MM
DOUILLE 18MM
CLE 9/16 PO
CLIQUET
CLE DE COUPLE
WO:
3
4
6
5
7
STEP 1.
Remove the contents from box and check for damage. Verify all parts are present. Read instructions completely
before beginning.
Remove existing body mount bolts. Body mount bolts will not be used for step bar installation.
Install front bracket to body mount using M12-1.75 x 110mm bolt, 1/2” lock washer, and 1/2” flat washer. Install
rear bracket with two spacer plates between bracket and body mount. Secure using M12-1.75 x 120mm bolt,
1/2” lock washer, and 1/2” flat washer. Hand tighten.
STEP 2.
STEP 3.
SEE FIGURE 2.
1
2
