3. A
SSEMBLY
W
ESTFIELD
- G
RAIN
A
UGERS
MK 130 P
LUS
X
61’ - 81’
24
30259
3.5. DISCHARGE SPOUT
Attach discharge spout with 7/16” x 1-1/4” bolts and locknuts (Figure 3.11).
Figure 3.11
3.6. THRUST ADJUSTER
Thrust adjustment transfers some of the pressure from the lower flight bearing to
the upper flight bearing.
1. Remove the upper bearing lock collar (if necessary).
2. Slide the lock collar and bushing onto the shaft and attach the 1-1/2” nut.
3. Turn the nut until it is snug against the bushing, then turn it so that the shaft
moves an additional 1/4”.
Part
Hardward
Amt
To attach
boot to flange
• 7/16” x 1-1/4” bolts
and locknuts
11
Wide rim flat
washer
• 1-3/4”
1
Square key
• 3/8” x 3-1/2”
1
Figure 3.10
Summary of Contents for MK 130 PLUS 71
