10
Operation
Clearing Foil Jams
A switch is located at the top left-hand side of the laminator that provides a “jam
release” mechanism in order to clear foil jams quickly.
1. If the foil jams, switch the unit off and press the switch (8) of the release
mechanism.
2. Firmly hold the laminator and pull the foil together with the document to be
laminated out of the laminator’s pouch entry.
3. Clean the unit several times as described in the section “Maintenance and
Cleaning”.
4. If foil jams occur repeatedly or jammed foil cannot be removed from the
laminator, please contact our customer services.
General notes:
Only laminating pouches with a thickness from 80-125 µm and a width of max.
245 mm can be used.
The overall thickness of foil pouch + document to be laminated must not
exceed 0.4 mm.
Documents that are too thin or too soft (e.g. fax paper) may cause twists.
Do not cut foil pouches to size before laminating. The resulting edges could
cause the pouches to jam.
Always make sure to insert the laminating pouches horizontally into the pouch
entry.
If the laminated foil is not completely transparent, re-laminate the same foil to
improve the lamination result.
Do not operate the laminator more than 1 hour at a time.
Please allow 15 seconds between every laminating process.