background image

 

 

Safety Notes

 

Please note the following safety notes to avoid malfunctions, 
damage or physical injury: 

ƒ

  Make sure the voltage corresponds to the type label on the unit. 

ƒ

  Use the high-pressure cleaner only as indicated in this manual for cleaning 

surfaces and objects outdoors. The appliance is not designed for continu-
ous, professional use. 

ƒ

  Persons with limited physical, sensorial or mental abilities are not allowed 

to use the unit, unless they are supervised and briefed for their safety by a 
qualified person. 

ƒ

  Never leave the high-pressure cleaner unsupervised when in use. Keep 

out of reach of children or persons in need of supervision. 

ƒ

  Never direct the high-pressure cleaner towards 

people, animals or plants. Do not point the high-
pressure cleaner towards equipment containing 
electronic components. Do 

not

 clean the high-

pressure cleaner itself with the water jet. 

ƒ

  When using extension cable, make sure that plug 

and coupling are splash water-safe. Only use 
extension cables which are approved for outdoor operation. Use approv-
able extension cable with a cable quality of H07 RN-F; 3x1.5 mm

2

. Ask 

your electrician. 

ƒ

  For using the unit, we recommend the use of an RCD with a residual 

current < 30 mA. In Switzerland the utilisation of an RCD is obligatory. 

ƒ

  Only use the high-pressure cleaner with the included accessory. Before 

using hoses, check for damages and do not use damaged hoses. Use only 
original spare parts which can be requested by Westfalia. 

ƒ

  First turn on water supply and make sure that the tap is open enough to 

supply enough water, before switching on the high-pressure cleaner. 

ƒ

  Observe the local and national codes when operating the unit in 

dangerous areas. Do not use the high-pressure cleaner in potentially 
explosive location. Vehicle engines may only be cleaned at location with 
appropriate oil separators. 

ƒ

  Clean very sensitive surfaces only from a minimum distance of 30 cm to 

avoid damages. 

Summary of Contents for Tornado 80 03 92




















Reviews: