Westfalia OSD 6-91-067, Instruction Manual

Page: 83 / 206

Westfalia Separator
Mineraloil Systems GmbH
83
2058-9001-101 / 0506
Maintenance (1)
after
operating
hours
at the latest
after
Operations
Remark
48 000 6 years
Equip the machines with new vibration isolators.
We recommend having the machines checked by a WS service engineer.
Legend:
(1) = The specified maintenance intervals are recommendations which apply only for normal conditions.
Negative operating conditions (e.g. low-grade fuel, excessively high temperature, strong vibrations, frequent starting and stopping of
the separator etc.) can necessitate shorter maintenance intervals.
(2) = see section 4.2.4 - Lubrication schedule
(3) = see section 4.2.3 - Oil quality and oil change
(4) = In the case of frequent starting and stopping of the separator, shaft-driven alternator operation and power plants shorter mainte-
nance intervals are required. It is not possible to state a definitive time. We recommend checking the clutch shoes after 1,000 oper-
ating hours or after 2 months at the latest.
4.2.2 Hoses and hose pipes
Replace hose pipes when an inspection reveals one or more of the following de-
fects:
•
Damage of the outer layer down to the fabric (e. g. chafe marks, cuts or
cracks).
•
Leaky spots.
•
Damage to or deformation of the hose fittings.
(Slight surface damage is not a reason for replacement.)
•
The hose becomes dislodged from the fitting.
•
Corrosion of the fitting diminishing function and strength.
Fig. 80
Protective hose 1
•
Fit the protective hoses at all con-
tact points to the separator.
•
Fit the protective tube along the en-
tire length of the cable tree (contact
points to the machine).
•
Adapt the length of the protective
hose.