16
Operation
I
II
2. Pull the ON/OFF switch back to turn off the machine.
Adjusting the Stroke Rate
Use the speed regulator (3) to adjust the stroke rate. The required
stroke rate of the saw blade depends on the material and the saw
blade used. You should find it out by testing in practice.
Adjusting the Pendulum Stroke
The pendulum is adjusted with the pen-
dulum stroke adjusting lever (7). The
pendulum gives the saw blade a horizontal
pendulousness.
At level
0
the saw blade does not execute
any pendulum movement; the biggest
pendulum movement is at level
3
.
When moving downwards, the saw blade is
pushed backwards to ease the throw-off of
the splints. Because of this the cutting
speed for longitudinal sections rises and less power is needed while
sawing. Furthermore, the lifetime of a saw blade is increased.
