26
Operation
4
0°
+90°
-90°
Hold the release button pressed and move the motor housing by
turning the handle (6) up or downwards.
2. Release the release button PUSH (9) in order to fix the desired
angle setting. The motor housing is vertically pivotable up to
8 positions, from 0° up to +60° resp. up to -80°.
Adjusting the horizontal Working Position
1. The motor housing is also rotatable up to 3 positions. It can be
turned from 0° up to -90° resp. up to +90°.
2. In order to horizontally turn the
motor housing, first pull back the
release button (4) and then turn
the motor housing to the left or to
the right until the housing locks
audibly.
Attention!
Please note that operating the hedge trimmer without locked motor
housing is not possible!
3 Possible Working Position
