12
Operating
Before first Use
Remove the electric kettle from the packaging and check it for any damage in
transit.
Dispose of any non-reusable packaging material properly or store it in a safe
location out of reach of children.
Clean all parts of the electric kettle before using the first time as described
below (chapter “Cleaning and Storing”).
Assembling and using the Water Kettle
1. Place the base (6) on a solid, level surface. Slide the power cord through the
cord opening.
2. Only connect the base to a properly installed, earthed mains socket with
protective connection.
3. Fill the electric kettle with water. Do not overfill. Do not exceed the MAX mark
on the water level indicator (10) of the kettle.
4. Place the electric kettle on the base (6) and closed the lid (2) by pressing it
down.
5. Press down the switch (9) in direction
I
, to switch on the electric kettle. The
power indicator (7) LED turns on. Make sure the lid (2) is closed during opera-
tion.
Before using the electric kettle for the first time, fresh water should be boiled in
it twice for cleaning. Do not use any additives or detergents.
After boiling, the device automatically switches off. If you want to stop the
boiling process, lift up the switch (9) or just remove the kettle from the base.
6. Push down the lid lever (3) for pouring
water. Attention hot water! There is risk of
injury!
Disconnect the base from mains power if
you do not use the water kettle for a longer
period of time, when cleaning or moving it
or if any malfunctions occur.
Summary of Contents for 83 59 61
Page 3: ...III Übersicht Overview 1 2 3 4 5 6 7 8 9 ...
Page 19: ...15 Notizen Notes ...
Page 20: ...16 Notizen Notes ...