![background image](http://html1.mh-extra.com/html/westfalia/82-63-73/82-63-73_instruction-manual_963052022.webp)
Potentiometer
18
A
B
Adjusting the Stall Force
Due to special mounting situations it can, however, happen that the adjusted stall
force from factory is not sufficient, for reversing the gate. In this case, the stall
force setting has to be re-adjusted.
The potentiometers A and B are necessary to adjust the stall force of the sliding
gate opener.
The potentiometer A is for the stall force when opening the gate and the
potentiometer B is for the stall force when closing the gate.
Turn the respective potentiometer
-
clockwise for increasing the stall force and
-
counter clockwise for decreasing the stall force.
The increase in the stall force is a percentage increase in relation to the learned
values.
Turing to the left is equal to a force increase of 0%,
adjusting to the middle setting is equal to a force increase of +15%,
turning to the right us equal to a force increase of +75%.
Warning. There is risk of injuries when increasing the stall force
extensively.
When adjusting the stall force too high it might happen
that the gate will not close in time. This can lead to personal injury by
entrapment and or objects might be damaged. Do not adjust the stall
force too high!