![background image](http://html1.mh-extra.com/html/westfalia/82-63-73/82-63-73_instruction-manual_963052009.webp)
Preparation
5
Before first Use
Unpack all parts of the device and check them for damage in transit and
completeness according to the overview on page
III + IV
.
Dispose of packaging materials or store it out of reach of children. Plastic bags
etc. may become a deadly toy for children.
Intended Use
The sliding gate opener is only designed for operating light-weighted sliding gates
in the domestic, non-commercial sector with medium transit frequency. The max.
permissible size of the gate and the max. weight must not be exceeded.
Mounting Conditions/Requirements
The sliding gate opener is designed for gates with max. weight of 400 kg. The
structure of the gate has to be rigid (iron, metal, wood). The gate path must
not have any gradients/slopes.
The sliding gate system must be in good mechanical and trouble-free
condition and should not be damaged or has signs of wear. It must be
possible to open and close the gate by hand without any problems. The
mechanical gate lock must be dismounted resp. disengaged.
The gate slide track must be linear and horizontal. The gate poles have to be
fixed in concrete.
The magnet limit switches are correctly positioned.
The control box may only be installed by a qualified professional in an easily
accessible place.
The centre of gravity of the gate must be in the middle of the gate (max.
allowable deviation ± 20 %).
Preparation
1.
Check all parts for damage in transit. Do not use a defective sliding gate
opener or defective accessory.
2.
To ensure proper and quick mounting, read the manual thoroughly. Allow a
second person to assist you. This will make installation easier.
3.
Have the required tools available.
- Power Drill and Drill Bits
- Tape Measure/Folding Ruler
- Open End Wrenches (Size 14 and 17)
- Wire Stripers