Operation
15
Screw
Washer
Cutting Bar
Shaft
Changing the Cutting Bar
First pull the spark plug cable!
If you have to tilt or turn over the lawn
mower, e. g. for replacing the cutting bar,
we recommend draining the fuel tank in
order to avoid fuel spillage.
1. Tilt the lawn mower and remove the
screw and the washer.
2. Unscrew the screw by turning counter
clockwise. Hold the cutting bar with a
cloth or cut-proof gloves in order to
keep the spindle from turning.
3. Replace the cutting bar resp. have a
blunt resp. damaged cutting bar
sharpened by a professional only. Please note that a re-sharpened cutting
bar has to be rebalanced, especially when the cutting bar has been
abused by hitting a foreign object.
4. Re-tighten the screw by turning clockwise. Hold the cutting bar firmly in
order to keep the spindle from turning. Tightening torque is 45 Nm.
After Work
After work, switch off the engine, wait until the machine has come to a
complete standstill and pull the spark plug cable.
Transport resp. carry the lawn mower only if the engine is switched off.