![background image](http://html1.mh-extra.com/html/westfalia/80-00-63/80-00-63_instruction-manual_963305016.webp)
11
Operation
Raising a Load
1. Use the carrying belts (4) to hang
the bike, cargo carrier, kayak,
etc., to the two hooks (9) (fig.3).
2. Take the pull rope (1) from the
pull rope fastening (2).
3. Pull down the rope in short
strokes to raise the attached
load. Pull as far to the desired
height. If the rope is released, the
brake mechanism of the lifting
device prevents the load from
lowering.
4. Then tie the pull rope to the pull
rope fastening.
Lowering a Load
1. Take the pull rope (1) from the
pull rope fastening (2).
2. Use the pull rope to lift the braking mechanism a little bit.
3. Lower the attached load slowly.
4. Releasing the rope allows the braking mechanism to stop the lifting device
from lowering.
Maintenance and Inspection
Never repair or maintain the universal lifting device while it is loaded.
The universal lifting device should be inspected prior to use concerning any
damage or faults. Also listen for unusual sounds which may indicate trouble.
Frequently check the lifting device by operating with and without a load,
stopping at various positions to test that the load is being held correctly. If the
load moves or slips the lifting device should be taken out of service and
repaired.
Immediately replace the lifting rope in case of any damage.
Cleaning and Storing
Wipe the parts of the lifting device with a lightly moistened cloth. Do not
immerse it into liquids.
Store the universal lifting device indoors in a dry place that is protected from
dust, dirt and extreme temperatures.
Fig. 2