8
Using
Intended Use
The compressed air blow out gun of this set is intended for cleaning and
blowing out material from objects and difficult to access places.
The intended use also includes an operation following the operating
instructions.
Any use beyond these parameters (different media, applying force) or any
changes (reconstruction, no original accessory) can lead to serious risks and
is regarded as use that is contrary to the intended purpose. The operator is
liable for any damage caused by improper use.
Before first Use
Unpack the air blow out gun and the required accessory and check all parts for
any damage in transit. Dispose of packaging materials or store them out of reach
of children. Plastic bags etc. may become a deadly toy for children.
Start-up
The air blow out gun is equipped with an R ¼” air connection (5). For your own
safety it is not recommended to use a permanent connection between the air
blow out gun and the air hose, but use one of the supplied quick coupling
adaptors (9) instead.
Seal the thread of the quick coupling adaptor with Teflon tape before you
screw it on the air connection.
Screw the ball needle (3) or the blow out nozzle (2) on the tool holder (7) of the
blow out gun.
Connect the air hose to the compressed air generator and power up the
generator.
Press the trigger (6) to start the delivery of air. The more you press the trigger,
the higher the air output rate will be.
Release the trigger to stop the delivery of air.
After work disconnect the tool from the compressed air generator.
Notes on using the Auto Valve Adaptor
Seal the thread of the quick coupling adaptor (9) with Teflon Tape.
Connect the quick coupling adaptor with the auto valve adaptor (4).
Connect the prepared auto valve adaptor with the quick coupler of the flexible
air hose.
