9
Using
Air Spiral Hose
Use the spiral hose (8) to connect the air tool to the compressed air generator.
Connect both quick couplers (1) with the R ¼” threads of the air hose.
Connect the quick couplers with the compressed air source and with your
compressed air tool.
Air Pressure and Air Volume
Operate the blow out gun with a pressure of 2 – 4 bar using a compressor with
an air suction capacity of at least 200 l/min. When using higher pressure for
operating the air tool than the max. permitted pressure of 8 resp. 9 bar, its self
life will be reduced drastically. The ideal capacity is provided by compressors
with a suction capacity of 300 – 400 l/min.
Only use air hoses with an inner diameter of at least 9 mm. When setting up
the air pressure, always keep in mind that the pressure will decrease approx.
0.6 bar when using a 10 m long hose with an inner diameter of 9 mm.
Maintenance and Care
To ensure proper functionality and a long lifetime, diligent lubrication and
maintenance is essential.
For operating pneumatic tools clean air is required. Corrosion residues, dust
and dirt from the pneumatic pipes reduce the efficiency of the tool and will
cause technical problems.
Do not allow liquids to enter the tools and never immerse them into liquids.
Water in the compressed air inlet can damage the machine. Therefore it is
recommended to drain the air lines and the compressor regularly! Also clean
the air filters in regular intervals.
If necessary, clean the parts of the set with a moist cloth.
Do not use abrasive or aggressive chemicals as benzene or thinner, which
may dissolve plastic parts.
Storing
Store all parts of the set in a dry location that is protected from dust and dirt.