V
Please note the following safety advice to avoid malfunction and
damage:
Do not use the saw bench stand a scaffold, ladder, stool or similar.
Use the bench stand on a solid level ground and make sure the
ground will support the weight of the stand and the weight of the circu-
lar saw.
Do not use the bench stand if any parts are damaged or bent.
Scope of Delivery
Nuts
28 Pieces
Rubber Feet
4 Pieces
Spring Washers
28 Pieces
Legs
4 Pieces
Flat Washers
32 Pieces
Cross Braces
8 Pieces
Bolts
28
Pieces
Assembling and Using
1. Assemble the roller stand as
shown in the drawing (see page
III
).
2. Before using the stand, tighten all
screws and place the circular saw
on the stand. Make sure the
bench stand sits steadily on the
ground. From time to time check
the screws and nuts for tight fit.
Cleaning and Storing
To remove dust and dirt, clean the
bench stand with a lightly mois-
tened cloth or a hand broom.
Do not clean the bench stand with
aggressive detergents or chemi-
cals.
Store the bench stand in a dry
place.
Using
