9
Safety Notes
Make sure the operating voltage stated on the type label corresponds to
the power mains available in your area.
Persons with limited physical, sensorial or mental abilities are not allowed
to use the unit, unless they are supervised and briefed for their safety by a
qualified.
Wood dust may be hazardous to your health. Always wear a dust
mask.
When using the unit, please wear ear protection and safety
goggles.
Check the biscuit jointer and the electrical connections for any
damage and do not use the tool if the biscuit jointer or the cable is
damage.
Use the biscuit jointer and the included attachments according to this
manual and only for the intended purpose.
Make sure the biscuit jointer is switched off before plugging in.
Clamp the work piece with chuck or a vice to avoid slipping. When
operating the machine always hold the biscuit jointer firmly with both
hands. Always provide for a secure footing when working.
Protect the biscuit jointer from moisture and do not immerse the machine
in liquids of any kind.
The biscuit jointer must be running at full speed before lowering into the
work piece.
Caution: Allow for run down time of the cutter blade after turning the biscuit
jointer off. Wait for the machine to come to a complete stop before remov-
ing from the work piece.
Do not force the biscuit jointer. Your biscuit jointer will do better job if you
take it slowly.
Avoid cutting nails and screws. Inspect the work piece and remove all nails
and screws before cutting.
Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury:
