![background image](http://html.mh-extra.com/html/westfalia/31-57-62/31-57-62_instruction-manual_963273016.webp)
11
Operation
Changing the Cylinders
Before undertaking any Kind of Work on
the Machine pull the Power Plug!
Remove the basket from the machine. Turn
the machine over and place it on the ground
upside down. Loosen the two internal hex
screws which hold the bearing opposite to
the driven end of the cylinder. Unhook the
cylinder from the drive wheel and set it
aside. Hook the other cylinder into the drive
wheel with the hex flange on the driven end.
Secure the flange on the other end with the
cap and the internal hex screws. If
necessary, tighten the screws after a few
minutes of operation.
Maintenance
Before undertaking any kind of work on the machine, pull the power
plug!
From time to time, apply suitable grease to the hexagonal flange of the
cylinders.
Cleaning
Use a stiff brush and a moist sponge to clean the machine. Do not use
aggressive chemicals or abrasives. Do not allow liquids of any kind to enter
the housing.
The unit does not contain parts serviceable by you. Do not disassemble it and
do not try to repair it yourself.
In the case of questions or problems please turn to our customer support
department.
Summary of Contents for 31 57 62
Page 1: ...Westfalia Bedienungsanleitung Nr 107112 ...
Page 4: ...III 1 3 4 6 7 2 5 ...
Page 17: ...12 Zeichnung Drawing ...
Page 21: ...16 ...