![background image](http://html1.mh-extra.com/html/westfalia/14-58-05/14-58-05_instruction-manual_963020015.webp)
10
Operation
Operation
1. Press the On/Off push button (1) once to switch on
the forward, bright LED of the flashlight function
(9).
2. Press the On/Off push button on more time to
switch off the flashlight and to switch on the 8
LEDs of the lantern function (5).
3. Press the On/Off push button a third time to switch
off the lamp completely.
Emergency Cell Phone Charging
1. Pull the latch of the rubber cover of the USB
interface (6) and flip the cover to the side.
2. Plug the USB charging cord (not included) of the
cell phone into the USB interface of the lamp and
connect the other end of the cable to your cell
phone.
3. The charging LED (3) lights. The cell phone is
charged by the internal battery of the lamp.
4. In case the internal battery of the lamp is
discharged, the lamp can be recharged by means
of the hand crank. This way the energy can be
delivered to the connected cell phone.
Notes:
Charging time and potential using time of the cell phone depends on the cell
phone and on the battery of the cell phone and varies from system to system.
15 Minutes of cranking can result in a using time of 1 minute of your cell
phone.
Not all cell phones or USB cables are compatible to the USB interface of the
3 in 1 flashlight. You may try using a different USB cable.
The USB charger function of this product mainly has been designed to charge
mobile phones in case of emergency. Daily charging this way is not
recommended.