WESTERSTRAND 121346-00, User Manual

Page: 5 / 12

Document: 1632en03.doc
WESTERSTRAND
Author: CAn
Date: 2003-09-03
Page: 5 of 12
WESTERSTRAND URFABRIK AB
Box 133 Tel. +46 506 48000 Internet:: http://www.westerstrand.se
SE-545 23 TÖREBODA Fax. +46 506 48051 e-mail: info@westerstrand.se
Programming
General
Use the buttons R, F and P to program the clock.
R Return Return to normal mode
F Function Select function/Accept
P Programming Change/Select.
The buttons are self-repeating if pressed for more than 0,7 s.
A total of 40 different signal points can be programmed. A signal point is a programming of the relay output at a
certain time and with a certain signal type, e.g. switch ON at 07.00 on Mondays.
Functions
Select with button F :
F1 Set time
F2 Set slave clock time
F3 Relay programming
F4 Impulse length for the relay output. This setting is relevant only when the output is programmed for
“Pulse” (1-59 sec).
F5 Set impulse length for the outgoing minute impulse (0,5-4,0 s.)
F6 Select synchronisation source (minute impulse or DCF)
Abbreviations used in the programming menus:
y year
n month
d day
H hour
n minute
S second
P program no.
S
signal type
E
erased signal point
0
switch OFF (relay contact open)
1
switch ON (relay contact closed)
P
pulse (the relay is activated for a programmed time, 1-59 sec)
W
weekday
Manual control
With the clock in normal mode, the relay can be controlled manually by pressing button ”P”.