Western UltraMount 2, Owner'S Manual

Page: 80 / 120

Lit. No. 72444, Rev. 05 81 April 1, 2021
OPERATING YOUR SNOWPLOW
TRANSPORTING THE SNOWPLOW
NOTE: For MVP PLUS™ and MVP 3™ blades,
use care when driving or entering driveways
with the snowplow in the retracted (vee)
position. The outer ends of the cutting edges
could contact the ground.
NOTE: Always transport the WIDE-OUT™ and
WIDE-OUT™ XL snowplows with both wings
fully retracted.
1. Completely raise the blade.
2. Adjust the blade height for maximum
snowplow headlamp illumination.
3. Adjust the blade to the straight position.
4. Turn the control OFF to lock the blade in place.
NOTE: Overheating is unlikely under normal
driving conditions, but occasionally the
snowplow may be positioned where it de
fl ects
air away from the radiator. If this occurs,
stop the vehicle and raise, lower, or angle the
snowplow slightly to correct overheating.
NOTE: Only the driver should be in the vehicle
cab when the snowplow is attached.
WARNING
Position the blade so it does not block the
headlamp beam.
Do not change blade position while
traveling. You could suddenly lower the
blade accidentally.
CAUTION
Transport speed should not exceed
45 mph (72 km/h). Further reduce speed
under adverse travel conditions.