January 1, 2002
14
Lit. No. 13648/9511
REMOVING THE SPREADER
Under-Frame Mount
NOTE: Empty the hopper before removing the
spreader.
NOTE: Grease the electrical connections using
dielectric grease.
1.
Disconnect the spreader wiring harness from the
vehicle wiring harness.
2.
Install the plug cover over the vehicle harness
plug.
3.
Remove the hairpin cotter pins and the hold-down
pins.
4.
Using a hoist or two people, tip the hopper
assembly forward and lift it off of the mount
assembly.
5.
Remove the linchpins and hitch pins retaining the
secondary frame.
6.
Remove the secondary frame assembly from the
subframe.
Hitch Pin
Spreader Wiring Harness
Vehicle Wiring Harness
Hairpin Cotter Pin
Hold-down Pin
Secondary
Frame
Subframe
Summary of Contents for PRO-FLO
Page 2: ......
Page 4: ......
Page 25: ...Lit No 13648 9511 21 January 1 2002 ...
Page 26: ...January 1 2002 22 Lit No 13648 9511 ...
