Western PRO-FLO, Owner'S Manual

Page: 16 / 28

January 1, 2002 12 Lit. No. 13648/9511
BLAST
ON
OFF
SPINNER
On/Off Control Switch
Used to start and stop
the spinner. OFF position
operates as emergency
stop when required.
Spinner Indicator Light
Illuminated light Indicates
power to the motor.
OPERATING THE SPREADER
1. Move the power switch to the on position to start
the motor. Motor will start immediately. The power
switch will remain in this position.
2. Move the power switch to the OFF position to stop
the motor. The power switch will remain in this
position. The power switch OFF position operates
as emergency stop when required.
NOTE: The truck ignition must be on to start the
spreader.
WARNING
Before starting the motor, be sure all
personnel and equipment are clear of the
discharge area.
NOTE: If the truck ignition is turned off while the
spreader is running, the motor will automatically
stop.
NOTE: Always place the vinyl cover over the
hopper to prevent moisture buildup. Do not let
the spreader sit idle with material in the hopper
for an extended period of time. This can cause
the material to compact and reduce or stop the
flow of material.
If there are problems while operating the spreader,
refer to the Troubleshooting section in this manual.
ON/OFF Control
Starting and Stopping the Motor
Move and hold the power switch to the BLAST position
for as long as momentary operation is needied. When
released, the switch will automatically return to the
OFF position and stop the motor.
Blast Position