Lit. No. 13648/9511
7
January 1, 2002
9.
Connect the spreader wiring harness to the vehicle
wiring harness.
Under-Frame Mount
1.
Install the secondary frame into the subframe.
NOTE: Grease all electrical connections with
dielectric grease.
2.
Insert the hitch pin on each side, and secure with
linch pins.
MOUNTING THE SPREADER
Hitch Pin
Secondary
Frame
Subframe
8.
Insert hold-down pins and secure with hairpin
cotter pins.
Hairpin Cotter
Pin
Hold-down
Pin
10. Verify proper stoplight and spreader operation.
Spreader Wiring Harness
Vehicle Wiring Harness
CAUTION
Both hold-down pins must be in place and
secured with hairpin cotter pins. The hopper
assembly may become unstable if the pins are
not properly secure while the vehicle is in
motion. Never use a finger to check alignment.
CAUTION
Visually check Hitch Pin holes before
assembly. Never use a finger to check
alignment.
Summary of Contents for PRO-FLO
Page 2: ......
Page 4: ......
Page 25: ...Lit No 13648 9511 21 January 1 2002 ...
Page 26: ...January 1 2002 22 Lit No 13648 9511 ...
