Western Telematic NBB-1600-D20, NBB-1600DE-D20, NBB-1600CE-D16, User Manual

Page: 49 / 64

6-5
Operation
To switch plugs On/Off, initiate a reboot cycle, or set plugs to their Power Up
Default values, proceed as follows:
1.
Switch Plug(s) On:
Type
/ON
n and press
[Enter]
. Where " n " is the
number or name of the desired plug. For example:
/ON 1
or
/ON ROUTER
2.
Switch Plug(s) Off:
Type
/OFF
n and press [Enter]. Where " n " is the
number or name of the desired plug. Note that the "
/OFF
" command
can also be entered as "
/OF
". For example:
/OFF 2
or
/OF ROUTER
3.
Boot Plug(s):
To initiate a reboot cycle, type
/BOOT
n and press
[Enter] . Where " n " is a the number or name of the desired plug. Note
that the "
/BOOT
" command can also be entered as "
/BO
". For example:
/BOOT 1
or
/BO ATMSWTCH
4.
Set Plugs to Power Up Defaults:
Type
/D
and press
[Enter]
. Plugs
will be set to their default On/Off status (Power Up Default), which is
defined sing the Plug Parameters Menu as described in Section 5.3.3.
Notes:
• When you have accessed command mode using the System
Password, the Default command will be applied to all plugs.
• When you have accessed command mode using a Plug (User)
Password, the Default command will only be applied to the
plugs permitted by the password.
5.
Suppress Command Confirmation Prompt:
To execute a switching
or reboot command without displaying the "Sure?" prompt, include the
"
,Y
" option at the end of the command line. For example:
/ON ROUTER,Y
or
/BOOT 2,Y