6.
Operation
This section describes the capabilities that are available to Any-
to-Any Mode Ports, Buffer Mode Ports, and
Mux Mode Ports.
6.1.
Any-to-Any Mode:
Allows communication between connected devices, regardless of
dissimilarities between baud rate, parity, and etc.. Any-to-Any
Mode Ports can be connected to other Any-to-Any Ports by
accessing the Command Mode and issuing ASCII commands.
All MDS ports can be configured for the Any-to-Any Mode.
Any-to-Any Mode Ports cannot be connected to Buffer Mode
ports, Mux Mode ports, or Mux Output Ports. Note however,
that Any-to-Any ports
can
use the /R command to read data from
Buffer Mode Ports.
6-1
Figure 6.1: The Any-to-Any Mode
Summary of Contents for MDS-16
Page 20: ...4 6 MDS Series User s Guide...
Page 38: ...6 12 MDS Series User s Guide...
