Western Global FuelCube FCP1000, Operator'S Manual

Page: 18 / 32

14
4.2 MACHINE COMPONENTS
The FUEL CUBE
TM
is a double-walled tank for
holding, transferring or dispensing fuel. The fuel
tank
mounts inside the outer tank. The
FUEL CUBE
TM
is designed so the outer tank is large
enough to hold all the fluid should the inner fuel tank
break, crack or leak (110% capacity in the
interstice).Close and lock the lid when not using the
tank. The 3 inch fill plug is located on the inner tank
along with the 3 psi fusible plug for venting. Dip stick
is provided to check level visually whilst filling by
using dip stick (or optional fuel gauge).
An electric pump, hose and hand nozzle may be
used to transfer fuel and the nozzle hooks to the side
frame. Power must be supplied by the customer to
power the pump. Output and return line with valves
can be connected to an engine operating at a remote
location. The outer tank is designed with an access
hole for routing fuel lines if required for your
application.
An optional volume meter can be mounted under the
lid to measure the amount of fuel being dispensed.
Key Description
A Outer Tank with Removable Lid
B Inner Tank
C Hatch Lid
D TDG Placards
E Refueling Hose
F
Filler Cap (3”)
G Relief Vent
H
Fuel Return Line / Valve (1”)
I Fuel Feed Line / Valve (1
”)
J
Nozzle Storage Bracket
Contact Us
for information on
optional parts and accessories,
including: Fuel Gauges, Electric
Pumps, Fuel Meters, Power
Cords, and more.
A
B
C
D
E F G H I
J
External Components
Internal Components