Installation Guide
1. Overview
1.7 Ultrastar Data102 Rack Requirements
Warning:
The handles on the front of the chassis are not intended to be used to support the
weight of the Ultrastar Data102 . Lifting the unit by the chassis handles or trying to support the
unit on the handles can cause them to fail. This can cause serious damage to the unit or serious
bodily harm to those handling the unit. Always team lift the chassis by gripping the underside
of the unit, and never try to lift a chassis that is filled with drives.
Figure 5:
Installation, Servicing, and Removal
Attention:
Do not
install or remove the enclosure while it is populated with drives. The fully
populated enclosure exceeds the amount of weight that a team of two should lift.
1.7.1
Compatible Rack Hardware Configuration
The following table(s) list the approved rack hardware configurations for the Ultrastar Data102 :
Table 7:
Compatible Hardware Configuration 1
Parameter
Rack
PDU (Vertical)
PDU Mounting
Bracket
Additional Mounting
Bracket Hardware
Vendor
CRENLO/EMCOR
Server Technology
Server Technology
Various
Part
Number
AS-160099-03
(Drawing
Number EMCOR
526121 Rev 5)
412-0761-11_STV-4501
412-0761-20_STV-4502
412-0761-23_STV-4503
KIT-MBVPT-1B
(one kit per PDU)
4 x M6 x 16 Hex
Cap Screws
8 x M6 Fender
Washers
4 x M6 Hex Nut
with Nylon Lock
Quantity
1
2
2
Varies
7
