User Guide
6. Management
6.7 Firmware Upgrade
Note:
The vendor can take up to eight characters and the product can
take up to 16 characters. For example,
Vendor 8Product16
.
d.
Complete the previous substep for all devices that need to be multipathed.
Note:
One device of each vendor and product ID within the enclosure
must be added to the MPIO properties.
e.
Click
OK
at the bottom of the MPIO Properties pane.
f.
Reboot the host server when prompted.
Figure 34:
Reboot Required
Step 3 :
Verify that the devices added to the MPIO properties are under control of Windows MPIO.
a.
In the Computer Management window, under the host server, navigate to
Disk Drives
.
b.
Verify that the list of devices contains all of the expected devices.
Figure 35:
Computer Management
Step 4 :
Check the Path States of the MPIO.
a.
Click on the properties of one of the Multi-Path Disk Devices and select the MPIO tab.
66
