31
6193-3201
For example, Computer B
sees the computer D via
Ethernet Modems C & E. The
White Filtering requires that
at Modem C has computer B
in its white list, Modem E has
computer D in its Whitelist.
Computer A will be not be
able to access Computer D, as
Computer A is not present in the Whitelist in Modem C.
It is advisable to use the Apply Changes button to test the configuration entered. Once
the configuration is determined to be correct, the Apply Changes and Save button should
be used. In the event that the configuration is incorrect, a power reset will revert the unit
to previously saved configuration.
If an erroneous configuration has prevented all access to the module, SETUP
mode may be used analyze what is wrong with the configuration.
Simply switch
the dipswitch to SETUP and cycle power. The RM-90 will retain its configuration, however
will load up at IP address 192.168.0.1XX, netmask 255.255.255.0 with the radio and filter
disabled. The
XX in the IP address
is the last two digits of the serial number. Configuration
webpages will still show the original configuration. No changes are made to configuration
until the user saves changes. To resume normal operation, set the dipswitch to RUN and
cycle power.
MAC Address Filter Configuration:
Add Entries
Enter the MAC addresses of devices to be added
to the list. Multiple entries must be separated by
a semi-colon (;).
Delete Entries
Check the box alongside entries selected for
removal from the list.
Whitelist or Blacklist
Check the box to make the list a whitelist. This
will allow devices with the MAC addresses listed
to communicate with the module and utilise the
radio link. All other devices are blocked unless
they exist in an IP whitelist.
Uncheck the box to make the list a blacklist. This
will prevent all listed devices from using accessing
the module and using the radio link.
Apply Changes
Update settings.
Apply Changes and Save
Update settings and save to non-volatile memory.
6XXZhhEd^ci
7g^Y\Z
A6C
8a^Zci
7g^Y\Z
&.'#&+-#%#,'
&.'#&+-#%#()
6
7
8
9
:
&.'#&+-#%#,'
