WARNING - PREVENT ACCESS TO HAZARDOUS VOLTAGE
CABLE
Apply the protective cap (delivered with the MV and HV products) on the
power cable, according to the illustrated steps below.
To prevent accidentally pulling out wires, make sure the power cable and
the wires are firmly attached to the protective cap.
For screw connectors, make sure the screws are properly tightened, as
well as routing the wires separately from other wires. For connectors
with straps, fasten the cable as strain relief, as well as routing the wires
separately.
1
2
3
Figure 1. For HV models
1
2
3
Figure 2. For MV models
WARNING - REDUCE THE RISK OF FIRE
To reduce the risk of fire, use only telecommunication line cords with a
cable diameter of AWG 26 or larger. Regarding power cable dimensions,
see Interface Specifications.
CAUTION - CLASS 1 LASER PRODUCT
Do not look directly into a fibre optical port or any connected fibre,
although the product is designed to meet the Class 1 Laser regulations
and complies with 21 CFR 1040.10 and 1040.11.
6
RedFox 5528 Series
