Page
41
of
55
After operation
17
After operation
17.1
After operation
After operation of the CM2
XL
, it must be stored properly:
When storing the machine, the following points must be observed:
The CM2
XL
must be placed in such a way that it cannot tip
over or fall down.
At the storage site, the ambient conditions must meet the
required conditions (see technical data).
The machine, which does not have sufficient protection itself,
must be protected against the effects of the weather and
corrosive substances if these can impair safety.
If the machine is to be shut down for a long time, it may be necessary to
take preservation measures to prevent corrosion and other damage.
17.2
Dismantling / Disposal
Disassembly/disposal should be carried out by a specialist. Using specialists
in the recycling and waste management sectors ensures that waste is
disposed of correctly and recycled. The raw materials of the CM2
XL
must
be sorted according to disposal type and material. The
copper-containing components such as cables can be recycled.
Equipment such as fuses, capacitors, regulators, etc. must be disposed of
as electronic waste, these must not be disposed of with household waste in
order to prevent environmental damage. The support frame and the
protective covers can be recycled as metal scrap.
