Attachments
Page
30
of
55
12.1
Attachment of the equipment
The three-point hoist connects the machine and the attachment making it
into one working unit. The position and lifting of the attachment are
hydraulically controlled. In addition, the weight and load of the attachment
exert pressure on the front axle to improve traction.
The selected attachment is to be attached or coupled onto the CM2
XL
.
If ballast weights are required, they must be connected to the CM2
XL
at
the designated attachment points according to the instructions.
When attaching or coupling the attachments particular caution is necessary.
Fig. 18 - Fitting attachments
Always lower the attachments to the ground, turn off the engine, and
release the system pressure (by operating the control levers with the
engine off) before attaching or detaching the attachments' hoses. The
machine has a 270 mm lift height.
Floating position
The floating position of the hydraulic system is made possible by pulling
the control lever to the rearmost locking position.
