MAX Loaders
18
WESTENDORFMFG RR315270
Westendorf Manufacturing Co., Inc.
SECTION 4: OPERATION
Two types of leveling systems available for loaders:
•
Standard
•
Level UP Advantage™
STANDARD
- self-leveling requires the operator to
level the load as it is raised.
Ease the single lever control back and
away from you to lift and level the load
as it is raised.
LEVEL UP ADVANTAGE™
- the hydraulic load level-
ing system automatically levels the load as the loader
is raised.
The operator simply pulls back on the
control lever and the load will raise and
remain level.
Lifting The Load
Loader Operation
Refer to the tractor operator’s manual for a safe RPM to
run the tractor engine.
Fill The Bucket From A Pile
Approach and enter the pile straight in with a level bucket.
Ease the control lever back and toward you simultane-
ously to raise and rollback the bucket to breakaway the
load from the pile.
Raise and rollback the bucket to increase
your efficiency when filling the bucket.
A level bucket throughout the lifting cycle resists lifting
and will require more power to break away.
CORRECT
INCORRECT
LOADER DAMAGE.
To avoid loader damage:
• Enter the pile straight on.
• Do not attempt to turn while entering the pile.
• Turning while entering can cause damage to the
loader and/or the tractor.
To prevent injury:
• Never lift or carry anyone with
loader, bucket or attachments.
• Never use loader or attach-
ments as a work platform.
• Never allow a passenger on
the tractor.
FALLING HAZARD.
.
WARNING
To prevent
electrocution:
•
NEVER
let
equipment
near or contact
power lines.
• Electrocution
can occur
without direct contact.
•
ALWAYS
check clearance before
raising equipment.
•
DO NOT
leave
operator’s seat if any
part of equipment
contacts power lines
or cables.
ELECTROCUTION
HAZARD.
DANGER
LOADER DAMAGE.
NOTICE
