MAX Loaders
12
WESTENDORFMFG RR315270
Westendorf Manufacturing Co., Inc.
SECTION 3: MOUNTING / DISMOUNTING
11. To relieve pressure
on Smart-Lock (D),
a p p l y d o w n - p r e s -
sure to the ground
with LIFT cylinders.
Press Smart-Lock
button (E) and flip
latches forward to
unlock loader from
tractor.
12. Extend LIFT cylinders
to pull upper tower
bushing (B) away
from bracket (C).
Continue
extending
cylinder, about 8” until
the indicator (F) slides
past the stop (G) and
tower is released.
13. SLOWLY retract
BUCKET cylinders
to raise loader
tower bushing (A)
from bracket. Once
released, loader arms
will settle back and
rest against bottom
of the bucket when in
the stored position.
E
D
15. Place tractor transmission in park and relieve tractor
hydraulic pressure on LIFT CYLINDERS only.
See your tractor Operator’s Manual for correct procedure.
10. Fully dump loader
bucket and lower
arms to the ground
as shown.
WARNING!
Crushing
hazard. Prevent loader
from tipping by dismounting with approved bucket on
firm level surface. Detach loader on level surface. Keep
children and bystanders away from storage area.
Mounting
Bracket
Tower
B
C
Mounting
Bracket
Tower
A
14. SLOWLY back tractor
away--just enough to
clear lower receiver
on mounting bracket.
NOTICE! Watch hoses
while backing away!
Backing up too far will
pull or stretch the hoses
that are still connected
to the tractor.
WARNING!: Escaping fluid under pressure can
penetrate skin causing serious injury. Avoid hazard by
relieving pressure before connecting or disconnecting
pressure lines. Protect hands& body from high pressure
fluids. If injured seek immediate medical attention.
16. Disconnect
hoses and
electronic
circuit with
Hydra-Snap™.
See section 4
for operation.
17. Back away from loader.
F
G
Mounting
Bracket
Tower
Loader Dismounting
