17
Westendorf Manufacturing Co., Inc.
WESTENDORFMFG RR315270
MAX Loaders
SECTION 4: OPERATION
2. Slide the gauge tube until the pin on the dial
is inserted through slot (C) on the gauge tube.
Retighten nut (A).
3. Loosen bolt (H) holding pointer
to dial indicator. Rotate pointer
to desired location on decal
and re-tighten bolt.
1. With bucket on the ground and level. Loosen nut
(A) while holding adjustment plate (B) stationary.
Rotational Level Indicator Method of CALIBRATION
Flat Face Hydra-Snap™
THE ROTATIONAL LEVEL INDICATOR is used to
determine the
attachment angle in relation
to the surface.
Your loader is equipped with a multi-hose coupling, one handle Flat Face Hydra-Snap™ manifold.
The Flat Face Hydra-Snap™ is spill-free, couples under pressure, and saves time and environment.
Place transmission in park & relieve LIFT cylinder pressure
before connecting or disconnecting the Hydra-Snap™ manifold.
1. TO
DISCONNECT:
Close #
1
shut off valve.
Open #
2
relieve valve.
Rotate handle “slowly” to
disconnect.
Store
in the
parking location while
loader is dismounted.
Close cover to protect
ports from dust and debris.
2.
TO CONNECT:
Hold handle at 12 o’clock position and
rotate handle clockwise “slowly” until couplers and electronic
circuit engage. Close #
2
relief valve. Open #
1
shut off valve
to bucket cylinders. Mount the loader.
Note:
See tractor Operator’s Manual for correct procedure. Some trac-
tors require engine to be off to relieve hydraulic pressure, while others
require it to be running.
Optional Synchronizer Bar
If your loader is equipped with a synchronizer bar mounted
between the remote control couplers, it allows them to work in
unison for quicker attachment swaps between jobs.
Cover
Parking
Location
NOTE
When pressure is to great, bolts will shear as a pressure relief.
WARNING! Escaping fluid under pressure
can penetrate skin causing serious injury.
Avoid hazard by engaging valves before con-
necting or disconnecting pressure lines. Pro-
tect hands & body from high pressure fluids.
If injured seek immediate medical attention.
INSIDE VIEW
H
Gauge
Tube
A
Dial Indicator
Gauge Tube
Pointer
Pin
C
NOTE
This indicator measures
bucket position from rolled back to
dumped, we recommend positioning
the indicator near the center of decal.
www.loaders.com • 712-4
23-2762
To Bucket
Cylinders
Valve
OPEN
Valve
CLOSED