WESTELL.COM
RMC-7XX-G Installation and Web UI Guide
Device Setup and Installation
1-800-377-8766
Page 11
is oriented with the exposed circuitry down (to contact the circuit board) and the notched
corner (if it has one) at the open end of the holder.
B.
Gently press and hold the card holder against the circuit board and slide the metal hasp
toward the open end of the holder to lock it into place.
The card holder will remain locked against the circuit board until the hasp is moved back to
unlock it.
.
Figure 2
The mini SIM card is shown partially inserted into its holder
Important:
Installers might need to move the antenna leads connected to the phone
modem (see Figure 2) to install the SIM card. Care must be taken not to tear
these leads loose or otherwise damage their connections.
3. Reinstall the RMC-7XX-G top cover.
Step B: Attach Chassis Ground
Connect the chassis ground of RMC-7XX-G (see Figure 3) to a suitable ground such as the frame
ground of a rack system or a reliable earth ground using 14AWG conductor.
Sliding metal hasp
SIM card partially
inserted in
raised holder
Antenna
leads
