Digital Repeater Line
DSP85 Series
WESTELL.COM
© 2016 Westell Technologies
14 June 2016 Doc. No. 960-1666-MNL rJ
1.877.844.4274
Page 75 of 77
Mount the cross band coupler on the wall close enough to the repeater modules to allow the RF jumpers to reach
from the CBC to the repeaters. The attachment system used to anchor the CBC to the wall must be able to support
at least 8.4 lbs (3.8 kg).
Use a wall anchoring system for the repeaters that can support at least 42.lbs (19.05 kg) for each dual band module
and 23 lbs (10.43 kg) for each single band add on module. The power supplies are mounted approximately as
shown.
Figure F-4: System Interconnect
Interconnection of the repeaters in the rack or wall mount configuration requires the short RF jumpers supplied with
the CBC Module. The actual interconnections will depend on the bands and cross band coupler module being used.
Contact Westell’s technical support line at 1.877.844.4274 should you have questions about your specific
application.
