Digital Repeater Line
DSP85 Series
WESTELL.COM
© 2016 Westell Technologies
14 June 2016 Doc. No. 960-1666-MNL rJ
1.877.844.4274
Page 38 of 77
1.
Select the Serial radio button and click OK, Figure 4-4.
Figure 4-4: Serial Radio Button
NOTE
It may be necessary, to determine which COM port your computer uses for the
communications port. Do this in by viewing the system properties section of the
control panel using device manager. In this case, the communications port is COM
1. This is not to be confused with the serial port on the bottom panel of the repeater
that is also labeled COM 1.
2.
Click OK. A blank dialog screen, Figure 4-5 displays.
3.
Click Setup to expand the drop-down menu, Figure 4-5 and select Serial port. The Serial Port Setup
window, Figure 4-6, displays. In this window, you can make changes to the serial port setup.
Figure 4-5: Setup