Digital Repeater Line
DSP85 Series
WESTELL.COM
© 2016 Westell Technologies
14 June 2016 Doc. No. 960-1666-MNL rJ
1.877.844.4274
Page 39 of 77
4.
Configure the terminal program for the correct COM port, Figure 4-6.
a.
Under the Port drop-down list, select COM 1.
b.
Under the Baud rate drop-down list, select 115200.
Figure 4-6: Serial Port Setup
5.
After completing the serial port changes, click OK. A dialog displays, prompting you to enter a user
name and password.
6.
Enter a username and password and press the Enter key. The TMI Main Menu displays, Figure 4-7.
IMPORTANT
In dual-band units, each band is changed independently and requires an
independent login. The default user name for the first band is bandone. The default
user name for the second band is bandtwo.
The password for both bands is csi1234.
7.
The set parameters option is disabled by default. To enable it, press 1. A dialog displays, prompting
you to enter a user name and password.
8.
Enter the default user name csi and the password csi1234.
