UltraLine II VDSL– Draft 1
030-300237 Rev. A
8/8/06
030-300237 Rev. A
21
August 2006
User Guide
UltraLine II VDSL Gateway (Model 826010)
Connection
Edit Connection
Factory Default = MainPPP
The name of the default connection profile. Westell recommends that you use the
Default parameter.
Connection Name
This field allows you to enter a new connection name of your choice (up to 64
characters).
Account ID
The account ID (provided by your Internet service provider).
Account Password
The account password that you are using to connect to your Internet service
provider (provided by your Internet service provider).
Connection
Factory default = Always On
Manual: Selecting this feature allows you to manually establish your PPP
session.
On Demand: Selecting this feature allows the Modem to automatically re-
establish your PPP session on demand anytime your PC requests Internet activity
(for example, browsing the Internet, email, etc.). When you have traffic, it may
cause a delay.
Always On: Selecting this feature allows the Modem to automatically establish a
PPP session when you log on or if the PPP session goes down.
MRU Negotiation
Factory Default = Enabled
When Enabled, the Maximum Received Unit (MRU) will enforce MRU
negotiations.
If Disabled, this function will not be activated.
LCP Echo
Factory Default = Enable
If ‘Disabled’ is selected, this option will disable the Modem LCP Echo
transmissions.
LCP Echo Failures
Factory Default = 6
Indicates number of continuous LCP echo non-responses received before the PPP
session is terminated. This value must be between 1 and 30 inclusive.
LCP Echo Duration
Factory Default = 30
The interval between LCP Echo transmissions with responses. This value must
be between 5 and 300 seconds inclusive and greater than or equal to the Retry
Duration.
LCP Echo Retry Duration
Factory Default = 5
The interval between LCP. Echo after no response.
This value must be between 5 and 300 seconds inclusive.
Log Debug Messages
Factory Default = Disabled
When Enabled (box is checked), the Modem will send log debug messages to the
syslog server.
