UltraLine II VDSL– Draft 1
030-300237 Rev. A
8/8/06
030-300237 Rev. A
15
August 2006
User Guide
UltraLine II VDSL Gateway (Model 826010)
7.5
Selecting the Ethernet Configuration
If you clicked
OK
in the preceding screen, the
Network
screen will be displayed. The
Network
screen shows the
settings for the newly created location. From the
Configure
field in the
Network
screen, select
Built-in Ethernet
.
Click
Save
.
NOTE:
Default settings for the Built-in Ethernet configuration are sufficient to operate the Modem.
7.6
Checking the IP Connection
To verify that the computer is communicating with the Gateway, follow the instructions below.
1.
Go to the “
Apple
” icon in the upper-right corner of the screen and select
System Preferences
.
2.
From the
System Preferences screen
, click the
Network
icon. The
Network
screen will be displayed.
3.
From the
Configure
field in the
Network
screen, select
Built-in Ethernet
.
4.
View the IP address field. An IP address that begins with
192.168.1
should be displayed.
NOTE:
The DHCP server provides this IP address. If this IP address is not displayed, check the Gateway’s wiring
connection to the PC. If necessary, refer to section 5 for hardware installation instructions.
