20
West Mountain Radio
Operating Manual
WSJT-X Example
1.
Select your transceiver make & model. If you do not have a CAT connection
then select none.
2. Select the DXPro CAT COM port number.
3. Ensure this value matches the CAT or CI-V rate of your radio. Check your
radio’s menu settings to be sure!
4.
Does your radio require flow control?
Hint: Most Icom transceivers DO NOT, modern Kenwood transceivers DO,
and most Yaesu transceivers can be configured EITHER way.
5. PTT Method. Because we must use the DXPro to control the transmit
function this must be set to RTS.
6. Select the DXPro Control COM port number.
7. Ensure you have USB selected here because we are using the
transceiver’s microphone jack for TX modulation.
8. This is your receive audio device and usually you’d choose the DXPro
Main/Sub/TX sound card.
9. This is your transmit audio device. This should always be set to DXPro
Main/Sub/TX.
10. You can select either the left or right audio channel, or mono if both
channels have the same audio presented to them.
11. Choose Both Left.