14
West Mountain Radio
Operating Manual
Select the Recording tab in the Sound
Control Panel (see to the right).
Double click on the Microphone DXpro
Main/Sub/TX entry (see below).
Select the Levels tab and adjust the
Microphone level to 100% and click on
OK.
Do the same for the Microphone DXpro
Mic/Sub entry. Keep in mind that after a Windows update from Microsoft these
values may get reset to defaults. If experiencing audio issues, the Sound
Control Panel is the first place to check.
Using the DXpro Settings Program
Many of the DXpro functions can be configured via software. The software
program to do this is installed when you install the WMR Diagnostic program.
DXpro Settings can be launched by double-clicking (left mouse button) on the
DXpro Control Port shown in the WMR Diagnostic program.