16
West Mountain Radio
Operating Manual
Max down time & Max gap between taps
When set to Analog Keypad, a four button keypad can be used instead. Allows
fine tuning of the footswitch timing. Clicking on Start Utility will bring up the
West Mountain Radio Voice Keyer software.
Features
Invert radio RX/TX allows you to change the polarity of the CAT (TTL) port to
suit older Kenwood CAT radios.
ClearSpeech DSP will turn on the CLRmod processor (if fitted) and provide
access to the ClearSpeech Control program.
AC Control
This option will enable or disable the 12VDC accessory output. If planning to
use the switched 12VDC output then the 12VDC Powerpole
®
cable must be
plugged in and connected to a suitable DC power supply. A 12VDC to 110VAC
relay product is available from West Mountain Radio.
Buttons
•
Start Utility will launch the DXpro Voice Keying program.
•
Reset to Default will restore factory default values.
•
I/O Diagnostics will launch the I/O Diagnostic program.
•
Audio Diagnostics will launch the Audio Diagnostic program.
• ClearSpeech will launch the CLRmod Control program (if fitted).
•
A Save button will appear if you make any changes.
I/O Diagnostics Program
This window displays all the control signals used in the DXpro. This can be
used for advanced troubleshooting.