In jack on the Computer Sound Card.
See the section “MIC MODE JUMPER – P6” later
in this manual and STEP 9 - ADVANCED AUDIO PROCESSING CONSIDERATIONS,
earlier in this manual, for more information on using the radio mic on the PC.
- This wire connects the Computer Speakers to the
RIGblaster Pro
. One end plugs
into the SPKR OUT (R8) jack on the rear of the
RIGblaster Pro
. The other end remains
as it was before, that is, connected to the Computer Speakers.
- This is a mini plug Patch Cord that connects the Computer Sound Card - Line Out
to the
RIGblaster Pro
. One end plugs into the LINE IN (R9) jack on the rear of the
RIGblaster Pro
. The other end plugs into the Line Out jack on the Computer Sound
Card.
- This is a mini plug Patch Cord that connects the Computer Sound Card - Line In to
the
RIGblaster Pro
. One end plugs into the LINE OUT (R10) jack on the rear of the
RIGblaster Pro
. The other end plugs into the Line In jack on the Computer Sound Card.
- This is a mini plug Patch Cord that routes receive audio from the Radio to the
RIGblaster Pro
. It provides half the path for DC isolated audio from the radio to the
computer. One end plugs into the AUDIO IN (R11) jack on the rear of the
RIGblaster
Pro
. The other end plugs into the EXTERNAL SPEAKER JACK [EXT SP] on the
transceiver.
- This wire connects the Radio External Speaker to the
RIGblaster Pro
. One end
plugs into the SPKR OUT (R12) jack on the rear of the
RIGblaster Pro
. The other end
remains as it was before, that is, connected to the Radio External Speaker.
- This is the Microphone Cable (supplied with the
RIGblaster Pro
) that connects the
RIGblaster Pro
to the Microphone Input jack of the transceiver. The end with the RJ45
connector plugs into the MIC OUT (R15) jack on the rear of the
RIGblaster Pro
. The
end with the standard 8-pin Screw on Mic Connector plugs into the MICROPHONE
CONNECTOR [MIC] jack on the transceiver.
- This wire, from the Power Supply (supplied with the
RIGblaster Pro
), provides
power for the
RIGblaster Pro
. It plugs into the POWER 12VDC (R1) jack on the rear of
the
RIGblaster Pro
.
- This wire connects an existing PTT Foot Switch to the
RIGblaster Pro
. It plugs into
the PTT IN- RCA Phono Jack (R14) on the rear of the
RIGblaster Pro
.
Summary of Contents for RIGblaster Pro
Page 30: ......