YAESU
with RJ45 Microphone Connectors and most, but not all Yaesu FM rigs
INPUT SIDE
Pin #
1
Blue Shunt Jumper to
Pin 1 - OUTPUT Side
2
White Jumper to
PTT GND
– INPUT Side
3
White Jumper to
PTT - OUTPUT Side *
4
White Jumper to
MIC - OUTPUT Side *
5
White Jumper to
MIC GND
– INPUT Side
6
Blue Shunt Jumper to
Pin 6 - OUTPUT Side
7
Blue Shunt Jumper to
Pin 7 - OUTPUT Side
8
Blue Shunt Jumper to
Pin 8 - OUTPUT Side
OUTPUT SIDE
Pin #
2
White Jumper to
PTT GND
– OUTPUT Side
3
White Jumper to
PTT - INPUT Side *
4
White Jumper to
MIC - INPUT Side *
5
White Jumper to
MIC GND
– OUTPUT Sid
e
* - Crisscrossed White Jumper
RECEIVE AUDIO AVAILABLE ON THE MIC CONNECTOR
On some radios output audio is available on a mic connector pin and, therefore, can be
obtained with jumpering on the P1 jumper block inside the
RIGblaster Pro
. Consult the
microphone pin assignment diagram in the radio Owners manual to determine which pin on the
mic connector and thus which pin on the P1 jumper block to jumper to RCV AUD.
See the section titled “RECEIVE AUDIO FROM YOUR RADIO (3 WAYS)” for the different
methods of getting audio from the radio to the PC Sound Card.
Summary of Contents for RIGblaster Pro
Page 30: ......