19
EN
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and unplugged before attempting to
perform inspection or maintenance.
AFTER USE
Blow away dust from the inside of the tool by running the
tool at an idle for a while. Brush off accumulation of dust on
the base. Accumulation of dust in the motor or on the base
may cause a malfunction of the tool.
LUBRICATION
It’s advisable to re-lubricate the transmission system every
second time you replace your carbon brushes, because
grease loses its lubrication properties.
Should the machine fail in spite of careful manufacturing
and testing, its repair should be carried out by an authorized
service agent.
