8
EN
first align the screw of the lock knob (a) on
the holder to the holder mounting hole at the
bottom of the tool. Then fasten the holder to the
tool by turning the lock knob (a) clockwise.
Directly place the L-shaped holder with the
tool to the vertical magnetic surface. You can
change the height at will.
5. LASER TARGET BOARD
The laser target board provided with the tool
can increase the visibility of the laser beam
under unfavorable conditions (e.g. outdoors
with bright sunlight) or at large distances.
The reflective part of the laser target board
improves the visibility of laser lines. The
transparent part of the laser target board helps
for the visibility of the laser lines even from the
back of the laser target board.
6. LOW BATTERY ALARM
An alarm will be triggered when the laser level
is in a low battery condition. The alarm light
will illuminate red to indicate that you should
change the battery. After that, the laser level
will turn off automatically.
NOTE:
Change the 2 batteries at the same
time. Do not mix the old and the new batteries.
MAINTENANCE
1. Store and transport the tool only in the
supplied protective case.
2. Keep the tool clean at all times.
3. Do not immerse the tool into water or other
fluids.
4. Wipe off debris using a moist and soft
cloth. Do not use any cleaning agents or
solvents.
5. Regularly clean the surfaces at the exit
opening of the laser in particular, and pay
attention to any fluff of fibers.
6. If the tool should fail despite the care taken
in manufacturing and testing procedures,
repair should be carried out by an
authorized after-sales service center.
7. While the product has not been used for
long time, do regular inspection on the
battery. Please charge and discharge the
battery to extend the service life. When the
battery is low in capacity, charge it as soon
as possible.
8. Any debugging or repair required on this
product should be performed only by
authorized service personnel.
9. Use only replacement parts and
accessories recommended by the
manufacturer.
10. When the appliance is not in use, store it in
a place out of reach of children.
ENVIRONMENTAL PROTECTION
Waste electrical products must not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or retailer for
recycling advice.
Summary of Contents for TLM051
Page 3: ...1 2 4 5 3 6 7 8...
Page 4: ...1 2 1 2 ON OFF a Fig A1 Fig A2 Fig B Fig C Fig D Fig E1 Fig E2 Fig E3...
Page 30: ......
Page 31: ......
